What is the difference in audio recording quality between tape and hard drive video cameras? - video hard zoophile
I am looking for a video camera to record new shows for my group. Audio will be in force for 2 condenser microphones with an 8-foot-boom patches in a 1 / 8 inch jack microphone camera. Tape or disk, a better option to save as much as? I know that hard drives have more data. I am only concerned about audio quality.
Friday, February 12, 2010
Video Hard Zoophile What Is The Difference In Audio Recording Quality Between Tape And Hard Drive Video Cameras?
Subscribe to:
Post Comments (Atom)
1 comments:
No processing, and going through all the mics. You need the volume control.
Some consumer camcorders, Sony has a "MicRefLevel" scenario of the "normal" audio-profit and "low" gain for high-volume environments. This is rudimentary, but it works. The best part is the detailed manual control used audio - Canon HV30 or HV40.
Hard drives can be able to provide complete information, but hard drive camcorders for consumers in general, register with the much more highly compressed MPEG2 or AVCHD-definition and standard definition files meters. The goal of "better" compression * * less - not more.
Most decent condenser microphones is based XLR. For them to be used with a video camera for consumers with a 1 / 8 "(3.5 mm) stereo --or audio input, we recommend using an XLR adapter like a juicedLink (CX231) or BeachTek (DXA-6). In addition to gaining a more detailed control of audio, can also phantom power for condenser microphones. With XLR to 1 / 8 "tail" is not recommended - The shooting is very easy to get into your camcorder. XLR adapters are so determined not to make the voltage / plug all the cables queue. In addition, if the microphones used in a boom is likely a cable longer than about 15 meters - that is, you must use shielded - balanced - Son ... means the XLR.
If you insist on the same path with a 1 / 8 "tail, make sure that there are two XLR connectors provuide with some left / right audio separation. Again, this is not the RecCompletion of the course.
Are using you should consider reading "XY microphone placement" in Wikipedia stereo separation with the buses to maximize - or to a stereo microphone RODE or design of the Audio Technica AT-822 or A-825. .. Shure or vice-66th The microphone cartridges are in the XY-model, solid fat profit housing head end of the microphone.
Post a Comment